top of page
scansteel CG 225

scansteel CG 225

scansteel foodtech CombiGrind Series

This truly unique and universal new generation of meat grinders is providing the most excellent grinding results, fully comparable and even surpassing those of conventionally specialised grinders for fresh, tempered or deep frozen blocks without changing anything but the incoming raw materials to be ground, coarse or fine as required.


Minimum product stress provide ground end products with reduced fat separation during cooking and improved drying and curing ability. Variable speed drives for both feeding and grinding worm provide a balanced and constant flow to the cutting set, single or double. Easy access to all inner parts which require maintanance attention such periodical tightening and and lubrication.


High performance grinding within a wide capacity range is achieved through a low tolerance rigid design with smoothly shaped worms, hand forged, welded and ground superfine by skilled danish craftsmen combined with the smooth surfaces of the high precision CNC milled lining.


Easy and efficient cleaning of both feeding worm and grinding worm, which can both be easily disassembled and removed together with other grinding tools by means of the included tool trolley. Hole plates are easily removed and replaced during production with the included extraction tool, fitting the inner thread in the hole plate centre hole. The hygienic design provides easy access to and cleaning of all surfaces in contact with the product. The product area and drive components such as bearing etc. are completely separated by wide flushing channels with full visibility of and access to bearing sealings and drive clutches. This provides complete food safety as it is impossible for lubricants or bearing impurities to enter the product zone. Foldable safety fences prevent access to rotating parts during operation. All surfaces are either smoothly polished or ground and glass bead peened.


  • No smearing (NO fat out).
  • Excellent meat fat particle definition.
  • Perfect fine and coarse grinding of both fresh meat and frozen meat blocks.
  • Dual worm grinder with adjustable worm speed on BOTH feeding and grinding worm/auger.
  • Dual sanitation/cleaning zone on both feeding and grinding worm/auger.
  • CCR, Continuous Chip Removal System (Bone Chip removal system).
  • Grinding motors for frozen blocks from 45-90 kW motor.

View the brochure here.


Find out more via scansteel foodtech.

  • Uses

    scansteel foodtech grinders are normally used for the following applications (but not limited hereto):

    • Fresh meat raw material.
    • Frozen blocks of meat raw material.
    • Bones – beef, pork, poultry, fish, etc.
    • Fat – all types and temperatures.
    • Fish – all types.
    • Fish offal.
    • By-products
  • scanControl System

    scansteel foodtech CombiGrind Series is equipped with our scanControl System. This system continuously monitors the frequency converters on the feeding/pre-grinding worm/auger and the grinding worm/auger for grinding section. If, for any reason, the grinding worm/auger is overloaded by the feeding/pre-grinding worm/auger, the scanControl System decreases the feeding speed until acceptable grinding conditions have been re-established. In extreme situations, the scanControl System actually reverses feeding/pre-grinding worm/auger.

  • Technical Specifications

    Technical Specs

    Motor (breaker) 11kw
    Motor (grinding worm) 55kw or 75kw
bottom of page